Fault Code 35-1984
fan relay circuit is open or shorted
Power loss light: Off
Limp-in mode: None
Bad connection or wiring - Check the wiring and connections between
the logic module and the relay. Clean and regrease any corroded connectors
with dielectric grease and repair any shorts.
Bad relay - Disconnect the relay and apply 12V across the coil
terminals (single connector terminal and the dark blue wire). You
should hear a click and the connection between the grey wire and the light
green wire should be shorted.
- Coolant temperature is below 150^F
- The relay is off when the clutch is on or on when the clutch is off
Results If Component Fails
Fault code 35 is stored.
This page is maintained by Russell W. Knize and was last updated 08/28/98.
Comments? Questions? Send email.
Copyright © 1996-2003 Russ W. Knize