Fault Code 55


Description:  End of message
Power loss light:  Off
Limp-in mode:  None

Possible Causes

No further fault codes are stored.  If this is the only code received, then there are no codes stored in memory.  This code will always be given, even if nothing is wrong.  If you do not get this code, then you may not be retreiving the codes properly, or the power loss light may be burnt out.  The light should come on for 1 second when the ignition is initally turned on as a bulb test.

Diagnostic Method

Trigger Parameters

- No further codes in memory
Return to the Fault Codes Page


This page is maintained by Russell W. Knize and was last updated 08/28/98. Comments? Questions? Send email.

Copyright © 1996-2003 Russ W. Knize